DE4A - User contributions [en-gb]

DBA First iteration running phase

2023-03-28T09:08:52Z

Ard.vanderheijden: /* Status First Iteration pilot */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Final]

=== Introduction ===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

=== Status First Iteration pilot ===
{| class="wikitable" style="width: 60%
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''May 2022'''
|Simulation with real data
|RO
|NL
|Dutch (real)
|style="background-color:lightgreen"|Pilot completed
|-
|Real eProcedure with real data
|NL
|RO
|Romanian (real)
|style="background-color:lightgreen"|Pilot completed
|}

=== Legal risks and issues ===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
=== Measures taken ===

{| class="wikitable"
|+
!Measure description
!Tick if this measure was taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|''x''
|''Will be done when issues arise, which is not yet the case.''
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|''x''
|
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|''x''
|''Hans Graux''
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|''x''
|''Operators and product owners are informed and attend pilot run sessions. The portal allows for registration only, but no subsidies or other services can be requested. Data on the companies will remain in DE systems, without any further legal or practical consequence, as no services can be requested.''
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|''x''
|''Piloting activities are monitored by pilot partners.''
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|''x''
|''This wiki informs the DPO.''
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|''x''
|''[Pilotruns are attended by DBA partners, to identify any errors and eliminate consequences. Recordings of pilotruns will be captured as project-evidence, although all personal and company-date will be blurred before storing this evidence.''
|}

=== End date of the pilot running phase ===
The first iteration running phase ended July 2022.

DBA First iteration running phase

2023-01-27T07:10:17Z

Ard.vanderheijden: /* Status First Iteration pilot */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Final]

=== Introduction ===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

=== Status First Iteration pilot ===
{| class="wikitable" style="width: 60%
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''May 2022'''
|Simulation with real data
|RO
|NL
|Dutch (real)
|style="background-color:lightgreen"|Pilot completed
|-
|Real eProcedure with real data
|NL
|RO
|Romanian (real)
|style="background-color:lightgreen"|
|}

=== Legal risks and issues ===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
=== Measures taken ===

{| class="wikitable"
|+
!Measure description
!Tick if this measure was taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|''x''
|''Will be done when issues arise, which is not yet the case.''
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|''x''
|
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|''x''
|''Hans Graux''
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|''x''
|''Operators and product owners are informed and attend pilot run sessions. The portal allows for registration only, but no subsidies or other services can be requested. Data on the companies will remain in DE systems, without any further legal or practical consequence, as no services can be requested.''
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|''x''
|''Piloting activities are monitored by pilot partners.''
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|''x''
|''This wiki informs the DPO.''
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|''x''
|''[Pilotruns are attended by DBA partners, to identify any errors and eliminate consequences. Recordings of pilotruns will be captured as project-evidence, although all personal and company-date will be blurred before storing this evidence.''
|}

=== End date of the pilot running phase ===
The first iteration running phase ended July 2022.

DBA First iteration running phase

2023-01-27T07:09:53Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Final]

=== Introduction ===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

=== Status First Iteration pilot ===
{| class="wikitable" style="width: 60%
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''May 2022'''
|Simulation with real data
|RO
|NL
|Dutch (real)
|style="background-color:lightgreen"|Pilot completed
|-
|Real eProcedure with real data
|NL
|RO
|Romanian (real)
|style="background-color:lightgreen"|Pilot completed
|}

# Assuming that the Romanian/Dutch/Swedish eIDAS pilot node profile 1.1 can communicate with the AT eIDAS pilot node profile 1.2
# The AT eProcedure will be connected to the AT eIDAS pilot node in July 2022

=== Legal risks and issues ===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
=== Measures taken ===

{| class="wikitable"
|+
!Measure description
!Tick if this measure was taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|''x''
|''Will be done when issues arise, which is not yet the case.''
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|''x''
|
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|''x''
|''Hans Graux''
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|''x''
|''Operators and product owners are informed and attend pilot run sessions. The portal allows for registration only, but no subsidies or other services can be requested. Data on the companies will remain in DE systems, without any further legal or practical consequence, as no services can be requested.''
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|''x''
|''Piloting activities are monitored by pilot partners.''
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|''x''
|''This wiki informs the DPO.''
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|''x''
|''[Pilotruns are attended by DBA partners, to identify any errors and eliminate consequences. Recordings of pilotruns will be captured as project-evidence, although all personal and company-date will be blurred before storing this evidence.''
|}

=== End date of the pilot running phase ===
The first iteration running phase ended July 2022.

DBA First iteration running phase

2023-01-27T07:09:28Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Final]

=== Introduction ===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

=== Estimated earliest start dates of pilot (use case 1) ===
{| class="wikitable" style="width: 60%
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''May 2022'''
|Simulation with real data
|RO
|NL
|Dutch (real)
|style="background-color:lightgreen"|Pilot completed
|-
|Real eProcedure with real data
|NL
|RO
|Romanian (real)
|style="background-color:lightgreen"|Pilot completed
|}

# Assuming that the Romanian/Dutch/Swedish eIDAS pilot node profile 1.1 can communicate with the AT eIDAS pilot node profile 1.2
# The AT eProcedure will be connected to the AT eIDAS pilot node in July 2022

=== Legal risks and issues ===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
=== Measures taken ===

{| class="wikitable"
|+
!Measure description
!Tick if this measure was taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|''x''
|''Will be done when issues arise, which is not yet the case.''
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|''x''
|
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|''x''
|''Hans Graux''
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|''x''
|''Operators and product owners are informed and attend pilot run sessions. The portal allows for registration only, but no subsidies or other services can be requested. Data on the companies will remain in DE systems, without any further legal or practical consequence, as no services can be requested.''
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|''x''
|''Piloting activities are monitored by pilot partners.''
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|''x''
|''This wiki informs the DPO.''
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|''x''
|''[Pilotruns are attended by DBA partners, to identify any errors and eliminate consequences. Recordings of pilotruns will be captured as project-evidence, although all personal and company-date will be blurred before storing this evidence.''
|}

=== End date of the pilot running phase ===
The first iteration running phase ended July 2022.

Final iteration running phase

2023-01-27T07:06:23Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightgreen"|Piloting completed
|-
|Simulation
|AT
|RO
|Romanian
| style="background-color:lightgreen"|Piloting completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

Final iteration running phase

2023-01-27T07:05:46Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightgreen"|Completed
|-
|Simulation
|AT
|RO
|Romanian
| style="background-color:lightgreen"|Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2023-01-27T07:04:47Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:grey"|N/A
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:lightgreen" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightgreen" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-19T08:31:38Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:grey"|N/A
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:lightgreen" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightyellow" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-19T08:31:09Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:lightgreen" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightyellow" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

Doing Business Abroad Pilot

2023-01-19T08:30:40Z

Ard.vanderheijden:

[Final]

The Doing Business Abroad (DBA) [[Pilots|pilot]] of the DE4A project implements eProcedures for starting and doing business cross-border in Austria, the Netherlands, Romania and Sweden. It improves currently available cross-border procedures by implementing the Once Only Principle (OOP) and Digital-by-default. Under the explicit request of the company’s representative, the eProcedure portal will retrieve company registration evidence directly from the authentic source in the Member State of registration in the first pilot iteration. The second pilot iteration adds - amongst others - a mechanism to notify the eProcedure portal of business events that might impact its eServices (e.g. the company goes bankrupt - subscription & notification pattern) and allows for a light weight updating of company data (Lookup pattern). Piloting solutions to these highly complex processes are an important step in breaking down barriers in the European single market. In the end companies should be able to do business in any other Member State as easy as they do nationally.
[[File:Use_case_to_interaction_pattern_mapping.png|alt=|right|377x377px]]
The DBA pilot addresses some of the most important (research) questions for successfully implementing the SDGR and SDGR-related processes. Besides validating the OOP technical System for evidence exchange in real use cases, the DBA pilot extends the use of ''eIDAS'' to include representation scenarios: a natural person representing a company to apply for a specific eProcedure ''in another Member State''. An adequate solution for authenticating on behalf of companies is needed to implement the eServices to business that have been defined in the second annex of the Regulation. Using eIDAS authentication ‘on behalf of’ to start an eProcedure in the SDGR-domain requires coordination by the eProcedure portal: invoking eIDAS and using the result in an evidence request to the OOP Technical system. The portal can only do this when the concepts and solutions of both domains are fully aligned and the domains are connected. This is of special interest to the DBA pilot. Furthermore, the DBA pilot evaluates several SDGR-specific and related functions, like evidence exchange using the OOP TS components (including the DE4A connector), explicit request and preview, generation and exchange of canonical evidence and record matching. Finally, the DBA pilot provides guidance on future evolution of cross-border information flows by exploring a mechanism to notify public authorities of relevant business events impacting the eServices they provide.

Sections:

* [[DBA objective & goals]]
* [[DBA Use case definition]]
* [[Use Case "Starting a Business in Another Member State" (DBA UC1)]]
* [[Use Case "Doing Business in Another Member State" (DBA UC2)]]
* [https://wiki.de4a.eu/images/8/81/DBA_solution_Architecture_iteration_1_v0.9.pdf DBA 1st iteration Solution Architecture]
* [[DBA 2nd iteration Solution Architecture]]
* [[DBA Implementation|DBA Status]]
* [[DBA First iteration running phase|First iteration running phase]]
* [[Final iteration running phase]]
* [[DBA main conclusions]]

Additional pilots Use Case 1:

* [[Germany and The Netherlands]]

Deliverables:

* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/2844e6_06009964818747a0824f7dd2f9f75fde.pdf DBA D4.5 use case definition and requirements]
* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/f739c2_e386d7b6bf2c429f966de40161c885e0.pdf DBA D4.6 Pilot planning]
* [https://wiki.de4a.eu/images/e/e7/DE4A_D4.7_Initial_running_phase_report_v0.8_-_submitted.pdf DBA D4.7 Initial Running Phase Report]

DBA main conclusions

2023-01-19T08:28:02Z

Ard.vanderheijden: Created page with "Back to Doing Business Abroad main page The DBA pilot has been completed successfully and yielded valuable insights. Pilot partners managed..."

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

The DBA pilot has been completed successfully and yielded valuable insights.

Pilot partners managed to analyse the most important challenges for the implementation of the SDGR (like record matching, evidence-definition and powers validation), and developed an international infrastructure for cross-border exchange of company evidence by deploying and integrating DE4A common components to business registers and service providers. Also, a cross-border authentication and powers validation infrastructure for piloting was established, using eIDAS pilot nodes. This infrastructure was designed, implemented, extensively tested and thereafter used for real-life piloting with several companies, Data Owners and Data Evaluators.

Based on the executed eProcedures, interviews with all parties and representatives involved and on actual obsevations, using the OOP TS leads to many of the expected benefits the SDG regulations intends to create. Simpler eProcedures, shorter durations, immediate results, high quality of service and less effort for processing seem the most important benefits that were observed.

The piloted eProcedures have shown simplicity and speed, as well as lower cost for both companies and public authorities. The higher data quality results in less processing-errors for the Data Evaluator compared to the current way of executing procedures. A broad implementation is however a requirement to be cost-effective.

The need for receiving notifications about changes in business register entries was validated during analysis, design and interviews, regarding both changes in company data and company-concerned events. Analysis shows that this need cannot fully be fulfilled by BRIS, as for example not all public authorities have access to BRIS and BRIS does not cover all types of companies. Evaluating the Subscription and Notification pattern shows that benefits are present, but there seems to be a caviat. As the number of foreign companies in DE-systems is relatively low, the number of notifications will be low as well. Still, Data Evaluators would like to receive notifications so they can maintain a high quality of service delivery.

For Data Owners, integrating the OOP TS usally involves use of existing data services and an integration layer. Data Owners don’t encounter big chllenges, but also experience little benefits of the OOP TS.

Companies seem to focus on completing the online procedure as fast as possible and have little attention to read texts about – for example – the Explicit Request. Perhaps adding pop-ups and providing texts in the mother-tongue of the user increases awareness.

The used local infrastructure heavily determines the required effort for DE and DO integration. Member States therefore establish their own maximum velocity for implementing the necessary infrastructural, legal and procedural changes. Velocities differ between Member States because each Member State has a different starting point and therefore faces different challenges. Applying a general step-by-step strategy for implementing the SDG infrastructure, gradually increasing complexity, has proven to help with focus and management of the implementation.

The availability of an EU-wide operational eIDAS network and notified eIDs for representing companies (including powers validation) are prerequisites for implementing the SDG. As almost none of the Member States have notified eIDs for companies, temporary use of non-notified eIDAS were allowed for piloting the DBA procedures.

Full Powers validation os probaby sufficient for SME’s but large companies are expected to benefit from Fine Grained Powers validation and it makes sense to maintain this as a goal in the domain of validation the Powers of Representation. SEMPER specifications match the requirements for this goal. Starting with a simpler full-powers validation turns out to be a feasible and sensible first step. Arranging the appropriate mandate registration in the local Mandate management System proves to be challenging for representatives but is not part of the piloted process. Still, there is room for improvement in that domain.

Establishing a harmonized dataset that embodies the evidence to be exchanged cross- border turns out to be time-consuming. Having the evidence match the needs of Data Evaluators and making sure that this can be provided by Data Owners requires much analysis but is key in making the cross-border exchange of information valuable and durable. Focusing on a first limited, yet still valuable, set of data increases feasibility and secures progress.

Doing Business Abroad Pilot

2023-01-19T08:25:15Z

Ard.vanderheijden:

Final iteration running phase

2023-01-18T15:38:30Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightblue"|Testing in progress
|-
|Simulation
|AT
|RO
|Romanian
| style="background-color:lightgreen"|Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2023-01-18T15:37:46Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:lightgreen" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightyellow" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-18T15:37:25Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightyellow" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-18T15:37:08Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |Geel
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:lightyellow" |
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:Grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-18T15:36:19Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:lightyellow" |Grijs
| style="background-color:grey" |Geel
| style="background-color:lightyellow" |Grijs
|-
!NL
| style="background-color:grey" |Geel
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:lightyellow" |Grijs
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |Geel
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-18T14:40:27Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color:lightyellow" |
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightgreen" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-18T14:39:45Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |Geel
| style="background-color:grey" |N/A
| style="background-color:grey" |Geel
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" |Geel
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

Final iteration running phase

2023-01-18T14:39:05Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightblue"|Testing in progress
|-
|Simulation
|AT
|RO
|Romaian
| style="background-color:lightblue"|Testing in progress
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

Final iteration running phase

2023-01-18T14:38:31Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|AT
|Austrian
|Testing in progress
|-
|Simulation
|NL
|AT
|Austrian
|Testing in progress
|-
|Simulation
|AT
|RO
|Romaian
|Testing in progress
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

Final iteration running phase

2023-01-18T14:36:56Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2023-01-17T11:37:17Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

Final iteration running phase

2023-01-17T11:29:53Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="4" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="2" |'''January 2023'''
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2023-01-11T14:13:16Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-11T14:12:44Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |Grijs
| style="background-color:grey" |N/A
| style="background-color:lightyellow" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-11T14:12:17Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |Grijs
| style="background-color:grey" |N/A
| style="background-color:grey" |Deze
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-11T14:11:34Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |Grijs
| style="background-color:grey" |N/A
| style="background-color:grey" |Deze
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |donker
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |donker
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |donker
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

Final iteration running phase

2023-01-11T14:10:58Z

Ard.vanderheijden: /* Introduction */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|SE
|AT
|Austrian (fictitious)
| style="background-color:lightblue" |Development in progress
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="3" |'''January 2023'''
|Simulation
|AT
|RO
|Romanian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

Final iteration running phase

2023-01-11T13:52:20Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|SE
|AT
|Austrian (fictitious)
| style="background-color:lightblue" |Development in progress
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|RO
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightgreen" |Completed
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2023-01-11T13:51:38Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: lightgreen" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2023-01-11T13:51:22Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: lightyellow" |Deze
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

Germany and The Netherlands

2023-01-10T14:51:15Z

Ard.vanderheijden:

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

Late 2021, Germany showed interest to pilot UC1 based on the DBA infrastructure. For this, the state of Nordrhine Westfalia set up a pilot with The Netherlands, after Germany entered the DE4A Consortium as an observer.

'''Objectives and approach'''

The pilot was performed in a light weight approach, focussing on the main objective for Germany. This was to learn about the implementation of the SDG from a legal, organizational, technical and business perspective. More explicit learning goals and challenges were defined in a report as a result of the first phase of the pilot. The second phase concerned the implementation phase, which was completed within 6 months (!). The final phase was the pilot running phase, which took 2 weeks.

The city of Dusseldorf acted as DE, while the eProcedure was facilitated by a Shared portal (the Wirthaftsportal) that provides several eProcedures on behalf of multiple public authorities in the state of Nordrhine Westfalia. On the Dutch side, the Kamer van Koophandel (Business Register) acted as DO. For the pilot, The Netherlands could re-use the DE4A solution that was already in place, consisting of the DO integration with the DE4A Connector, the DE4A Connector itself and eIDAS infrastructure. Germany adapted the Wirtschaftsportal, set up eIDAS infrastructure for piloting and integrated all with the back-office from the city of Dusseldorf.

'''Main results'''

Germany learned that the pilot solution was implementable without any adjustment of laws. Many challenges were found during the technical implementation for the pilot, but none were extra-ordinary compared to regular implementations within DE4A pilots. The technical implementation as described above, was ready within 6 months.

4 real Dutch companies completed the eProcedure in the Wirtschaftsportal, including authentication and validation of powers, and including payment for the requested service. For pilot purposes, the registrations were invalidated by the city of Dusseldorf after evaluation had taken place.

Germany and The Netherlands

2023-01-10T14:39:04Z

Ard.vanderheijden:

Back to DBA main page

Late 2021, Germany showed interest to pilot UC1 based on the DBA infrastructure. For this, the state of Nordrhine Westfalia set up a pilot with The Netherlands, after Germany entered the DE4A Consortium as an observer.

Germany and The Netherlands

2023-01-10T14:38:16Z

Ard.vanderheijden: Created page with "Late 2021, Germany showed interest to pilot UC1 based on the DBA infrastructure. For this, the state of Nordrhine Westfalia set up a pilot with The Netherlands, after Germany..."

Late 2021, Germany showed interest to pilot UC1 based on the DBA infrastructure. For this, the state of Nordrhine Westfalia set up a pilot with The Netherlands, after Germany entered the DE4A Consortium as an observer.

Doing Business Abroad Pilot

2023-01-10T14:36:26Z

Ard.vanderheijden:

[Final]

The Doing Business Abroad (DBA) [[Pilots|pilot]] of the DE4A project implements eProcedures for starting and doing business cross-border in Austria, the Netherlands, Romania and Sweden. It improves currently available cross-border procedures by implementing the Once Only Principle (OOP) and Digital-by-default. Under the explicit request of the company’s representative, the eProcedure portal will retrieve company registration evidence directly from the authentic source in the Member State of registration in the first pilot iteration. The second pilot iteration adds - amongst others - a mechanism to notify the eProcedure portal of business events that might impact its eServices (e.g. the company goes bankrupt - subscription & notification pattern) and allows for a light weight updating of company data (Lookup pattern). Piloting solutions to these highly complex processes are an important step in breaking down barriers in the European single market. In the end companies should be able to do business in any other Member State as easy as they do nationally.
[[File:Use_case_to_interaction_pattern_mapping.png|alt=|right|377x377px]]
The DBA pilot addresses some of the most important (research) questions for successfully implementing the SDGR and SDGR-related processes. Besides validating the OOP technical System for evidence exchange in real use cases, the DBA pilot extends the use of ''eIDAS'' to include representation scenarios: a natural person representing a company to apply for a specific eProcedure ''in another Member State''. An adequate solution for authenticating on behalf of companies is needed to implement the eServices to business that have been defined in the second annex of the Regulation. Using eIDAS authentication ‘on behalf of’ to start an eProcedure in the SDGR-domain requires coordination by the eProcedure portal: invoking eIDAS and using the result in an evidence request to the OOP Technical system. The portal can only do this when the concepts and solutions of both domains are fully aligned and the domains are connected. This is of special interest to the DBA pilot. Furthermore, the DBA pilot evaluates several SDGR-specific and related functions, like evidence exchange using the OOP TS components (including the DE4A connector), explicit request and preview, generation and exchange of canonical evidence and record matching. Finally, the DBA pilot provides guidance on future evolution of cross-border information flows by exploring a mechanism to notify public authorities of relevant business events impacting the eServices they provide.

Sections:

* [[DBA objective & goals]]
* [[DBA Use case definition]]
* [[Use Case "Starting a Business in Another Member State" (DBA UC1)]]
* [[Use Case "Doing Business in Another Member State" (DBA UC2)]]
* [https://wiki.de4a.eu/images/8/81/DBA_solution_Architecture_iteration_1_v0.9.pdf DBA 1st iteration Solution Architecture]
* [[DBA 2nd iteration Solution Architecture]]
* [[DBA Implementation|DBA Status]]
* [[DBA First iteration running phase|First iteration running phase]]
* [[Final iteration running phase]]

Additional pilots Use Case 1:

* [[Germany and The Netherlands]]

Deliverables:

* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/2844e6_06009964818747a0824f7dd2f9f75fde.pdf DBA D4.5 use case definition and requirements]
* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/f739c2_e386d7b6bf2c429f966de40161c885e0.pdf DBA D4.6 Pilot planning]
* [https://wiki.de4a.eu/images/e/e7/DE4A_D4.7_Initial_running_phase_report_v0.8_-_submitted.pdf DBA D4.7 Initial Running Phase Report] (Submitted, not yet approved)

Doing Business Abroad Pilot

2023-01-10T14:36:01Z

Ard.vanderheijden:

[Final]

The Doing Business Abroad (DBA) [[Pilots|pilot]] of the DE4A project implements eProcedures for starting and doing business cross-border in Austria, the Netherlands, Romania and Sweden. It improves currently available cross-border procedures by implementing the Once Only Principle (OOP) and Digital-by-default. Under the explicit request of the company’s representative, the eProcedure portal will retrieve company registration evidence directly from the authentic source in the Member State of registration in the first pilot iteration. The second pilot iteration adds - amongst others - a mechanism to notify the eProcedure portal of business events that might impact its eServices (e.g. the company goes bankrupt - subscription & notification pattern) and allows for a light weight updating of company data (Lookup pattern). Piloting solutions to these highly complex processes are an important step in breaking down barriers in the European single market. In the end companies should be able to do business in any other Member State as easy as they do nationally.
[[File:Use_case_to_interaction_pattern_mapping.png|alt=|right|377x377px]]
The DBA pilot addresses some of the most important (research) questions for successfully implementing the SDGR and SDGR-related processes. Besides validating the OOP technical System for evidence exchange in real use cases, the DBA pilot extends the use of ''eIDAS'' to include representation scenarios: a natural person representing a company to apply for a specific eProcedure ''in another Member State''. An adequate solution for authenticating on behalf of companies is needed to implement the eServices to business that have been defined in the second annex of the Regulation. Using eIDAS authentication ‘on behalf of’ to start an eProcedure in the SDGR-domain requires coordination by the eProcedure portal: invoking eIDAS and using the result in an evidence request to the OOP Technical system. The portal can only do this when the concepts and solutions of both domains are fully aligned and the domains are connected. This is of special interest to the DBA pilot. Furthermore, the DBA pilot evaluates several SDGR-specific and related functions, like evidence exchange using the OOP TS components (including the DE4A connector), explicit request and preview, generation and exchange of canonical evidence and record matching. Finally, the DBA pilot provides guidance on future evolution of cross-border information flows by exploring a mechanism to notify public authorities of relevant business events impacting the eServices they provide.

Sections:

* [[DBA objective & goals]]
* [[DBA Use case definition]]
* [[Use Case "Starting a Business in Another Member State" (DBA UC1)]]
* [[Use Case "Doing Business in Another Member State" (DBA UC2)]]
* [https://wiki.de4a.eu/images/8/81/DBA_solution_Architecture_iteration_1_v0.9.pdf DBA 1st iteration Solution Architecture]
* [[DBA 2nd iteration Solution Architecture]]
* [[DBA Implementation|DBA Status]]
* [[DBA First iteration running phase|First iteration running phase]]
* [[Final iteration running phase]]

Additional pilots Use Case 1:

* Germany and The Netherlands

Deliverables:

* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/2844e6_06009964818747a0824f7dd2f9f75fde.pdf DBA D4.5 use case definition and requirements]
* [https://b0b3923b-028b-4cc4-aa23-7b874a2ae593.filesusr.com/ugd/f739c2_e386d7b6bf2c429f966de40161c885e0.pdf DBA D4.6 Pilot planning]
* [https://wiki.de4a.eu/images/e/e7/DE4A_D4.7_Initial_running_phase_report_v0.8_-_submitted.pdf DBA D4.7 Initial Running Phase Report] (Submitted, not yet approved)

Final iteration running phase

2022-12-14T09:15:53Z

Ard.vanderheijden: /* Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Work in progress]

===Introduction===
This page addresses general information about the first iteration running phase for the Doing Business Abroad pilot.

===Estimated earliest start dates of pilot (use case 1 with Full Powers Validation and/or Fine Grained Powers Validation)===
{| class="wikitable" style="width: 60%"
|'''Timeframe'''
|'''type'''
|'''Powers validation'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''October 2022 - January 2023'''
|Simulation with real data
|Fine grained
|SE
|RO
|Romanian (observing)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with real data
|Fine grained
|SE
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|SE
|AT
|Austrian (fictitious)
| style="background-color:lightblue" |Development in progress
|-
|Simulation with real data
|Fine grained
|RO
|NL
|Dutch (real)
| style="background-color:lightgreen" |Piloting completed
|-
|Simulation with fictitious data
|Full
|RO
|AT
|Austrian (fictitious)
| style="background-color:lightgreen" |Piloting completed
|}

===Estimated earliest start dates of pilot (use case 2)===
{| class="wikitable" style="width: 60%"
|
|'''type'''
|'''Data Evaluator'''
|'''Data Owner'''
|'''Companies'''
|'''Status'''
|-
| rowspan="5" |'''January 2023'''
|Simulation
|RO
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|NL
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|SE
|AT
|Austrian
| style="background-color:lightblue" |Development in progress
|-
|Simulation
|NL
|RO
|Romanian
| style="background-color:lightblue" |Testing in progress
|-
|Simulation
|SE
|RO
|Romanian
| style="background-color:lightblue" |Testing in progress
|}

===Legal risks and issues===
Should any legal risks / issues apply to one or more of the combinations of DEs and DOs to be piloted, they will be mentioned here.
===Measures taken===

{| class="wikitable"
|+
!Measure description
!Measure taken
!Description or comments (if any)
|-
|Piloting partners will '''communicate proactively towards each other on issues or incidents''' ('''always mandatory''')
|yes
|
|-
|Any real-life '''pilot participants (if applicable) are informed''' of the fact that they are involved in piloting activities,
including any risks and countermeasures taken, and the (lack of) legal effects and consequences of participation.

Appropriate documentation should be retained to demonstrate that this information has been provided.

'''(mandatory for medium and high)'''
|N/A
|recordings were made without the display of actual information
|-
|If the piloting involves '''real-life persons''', piloting should be organised under the '''supervision of a DPO'''.
'''(mandatory for medium and high)'''
|N/A
|
|-
|If the piloting would be done on a '''production environment''', all pilot partners should '''notify''' any operators of such environments in advance.
Appropriate measures should be taken that piloting activities d'''o not result in negative legal or practical consequences''' for any real-life persons, real life data, or production environments.

The production environments should be '''cleaned''' if the piloting activity was not intended to have long term legal or practical consequences.

'''(mandatory for medium and high)'''
|N/A
|
|-
|All piloting activities should be '''monitored by pilot partners''' (each solely in relation to such components of the piloting activities which are under their responsibility)
in a manner that allows any incidents to be detected and remedied (including by contacting any affected real-life persons where needed).

'''(mandatory for medium and high)'''
|Yes
|
|-
|The '''DE4A project DPO''' (Hans Graux) should be informed prior to initiating piloting activity, and of any incidents that are reasonably likely to create legal effects or practical impacts on any real-life persons

'''(mandatory for high)'''
|Yes
|
|-
|Implementation of a '''pilot monitoring and remediation strategy''' to assess whether exchanged evidences are reasonably capable of satisfying the requirements for high risk piloting documented in the deliverables,
and to ensure that any errors in the piloting activity can be detected and remediated in a manner that eliminates any negative legal or practical consequences.

'''(mandatory for high)'''
|N/A
|
|}

===End date of the pilot running phase===
The final iteration running phase will end January 2023.

DBA Implementation

2022-12-14T09:05:54Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: lightyellow" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: lightyellow" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-12-14T09:05:18Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:pink" |N/A
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |Yellow
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |Yellow
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-12-14T09:03:52Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-12-14T09:03:32Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-12-14T09:03:02Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|Green
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|green
|style="background-color:lightyellow"|Green
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T14:01:53Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T14:01:12Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T14:00:38Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:lightgreen" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T14:00:03Z

Ard.vanderheijden: /* Status of connections (iteration 2) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:pink" |this
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:pink" |this
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
| style="background-color:pink" |
| style="background-color:grey" |N/A
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey" |N/A
|-
!RO
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color:lightgrey" |
| style="background-color:grey" |N/A
|-
!SE
| style="background-color:pink" |
| style="background-color:grey" |N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T13:58:34Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: Deploying and connecting DE4A Connectors V2 between Member States; regression test on intermediation integration with DE/DO
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |DE4A Connector

acting

as DR
!AT
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
|-
!SE
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
| style="background-color:pink"|
| style="background-color:grey"|N/A
|-
!NL
| style="background-color:pink"|
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey"|N/A
|-
!RO
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
|-
!SE
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T13:57:14Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: Deploying and connecting DE4A Connectors V2 between Member States; regression test on intermediation integration with DE/DO
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |DE4A Connector

acting

as DR
!AT
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
|-
!SE
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
| style="background-color:pink"|
| style="background-color:grey"|N/A
|-
!NL
| style="background-color:pink"|
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey"|N/A
|-
!RO
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
|-
!SE
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

DBA Implementation

2022-11-21T13:55:49Z

Ard.vanderheijden: /* Status of connections (iteration 1) */

[[Doing Business Abroad Pilot|Back to Doing Business Abroad main page]]

[Draft]

This page contains the process, planning and status of establishing connections between participating Member States is presented.

=== Establishing connections ===
The DBA pilot is establishing and testing connections between participating Member States, using testcases and connectathons. During specific timeslots, experts of 2 (or more) countries join with technical experts of the DE4A program. The meetings are online, and focus on establishing the connection between DE4A Connectors or eIDAS nodes. Pre-defined testcases are used to collect necessary proof that the connection is functioning correct. Any last-minute errors are being resolved immediately (if possible).

==== DE4A Connector ====

===== Process =====
For establishing connections between DE4A Conectors of participating Member States the following steps are performed:

# Preparation
#* collecting necessary information for configuration of the common components.
# Local testing
#* setting up the national DE4A Connector and connecting this to a DE4A Connector in the DE4A playground.
# Connectivity testing
#* testing a full chain of components, using a [[Mock|Mocked DE]], the national DE4A Connector (acting as a DT or DR), the playground DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]].
# Connectathon
#* testing a full chain of components, using a [[Mock|Mocked DE]], one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a [[Mock|Mocked DO]] (Milestone 2 and 3)
#* testing a full chain of components, using a real DE, one national DE4A Connector (acting as a DT or DR), another national DE4A Connector (acting as a DR or DT) and a real DO (Milestone 4)

During the OOP TS connectathons, these test cases and preparations are being used / executed.

===== Versions of the connector =====
The DE4A Connector used for piloting will be developed in 2 main versions:

* V1: DE4A Connector supporting the intermediation pattern for piloting UC1
* V2: DE4A Connector supporting the intermediation pattern for UC1 the S&N and Lookup pattern for UC2

Only the V1 connector will be used in the first iteration (as only UC1 will be piloted in the first iteration). For the final iteration, only the V2 connector will be used. [[File:20210824 Test cases DE4A cross-border AT-NL-RO-SE.xlsx|alt=Testscases and preparations|thumb|Testcases, procedures and preparation for connectathons]]

=== Status of connections (iteration 1) ===

The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Full Powers Validation
!
! colspan="5" |Proxy
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|Connector
!AT
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|style="background-color:grey"|N/A
|style="background-color:lightgrey"|
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2/3: Connecting DE4A Connectors V1 between Member States
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|DE4A Connector

acting

as DR
!AT
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!NL
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|-
!RO
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|-
!SE
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|}

{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: Connecting DE4A Connectors V1, Data Evaluators and Data Owners between Member States
!
! colspan="5" |MS acting as DP
|-
!
!
!style="width: 16%"|AT
!style="width: 16%"|NL
!style="width: 16%"|RO
!style="width: 16%"|SE
|-
! rowspan="4" style="width: 16%"|MS
acting

as DC
!AT
|style="background-color:lightgrey"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:grey"|N/A
|-
!NL
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|style="background-color:lightgreen"|
|style="background-color:grey"|N/A
|-
!RO
|style="background-color:lightyellow"|
|style="background-color:lightgreen"|
|style="background-color:lightgrey"|
|style="background-color:grey"|N/A
|-
!SE
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightyellow"|
|style="background-color:lightgrey"|
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet

=== Status of connections (iteration 2) ===
The current status of participating Member States having established connections is displayed in the tables below:
{| class="wikitable" style="width: 60%;"
|+
eIDAS Milestone 1: Connecting eIDAS proxies and connectors with Fine Grained Powers Validation
!
! colspan="5" |Proxy
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |Connector
!AT
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
| style="background-color:grey" | N/A
|-
!NL
| style="background-color:grey" | N/A
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:grey" | N/A
|-
!SE
| style="background-color:grey" | N/A
| style="background-color:pink" |
| style="background-color:lightgreen" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 2: Deploying and connecting DE4A Connectors V2 between Member States; regression test on intermediation integration with DE/DO
!
! colspan="5" |DE4A Connector acting as DT
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |DE4A Connector

acting

as DR
!AT
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!NL
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
| style="background-color:pink" |
|-
!RO
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
| style="background-color:pink" |
|-
!SE
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:pink" |
| style="background-color:lightgrey" |
|}
{| class="wikitable" style="width: 60%;"
|+
OOP TS Milestone 4: MS ready for UC2 with S&N / Lookup pattern
!
! colspan="5" |MS acting as DP
|-
!
!
! style="width: 16%" |AT
! style="width: 16%" |NL
! style="width: 16%" |RO
! style="width: 16%" |SE
|-
! rowspan="4" style="width: 16%" |MS acting as DC
!AT
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
| style="background-color:pink"|
| style="background-color:grey"|N/A
|-
!NL
| style="background-color:pink"|
| style="background-color:lightgrey" |
| style="background-color: pink" |
| style="background-color:grey"|N/A
|-
!RO
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color:lightgrey" |
| style="background-color:grey"|N/A
|-
!SE
| style="background-color:pink"|
| style="background-color:grey"|N/A
| style="background-color: pink" |
| style="background-color:lightgrey" |
|}
Green = Connection established

Yellow = Connection partlially established (issues remaining to be solved)

Red = Connection not established yet