DBA 2nd iteration Solution Architecture

DBA pilot iteration 2

The 2nd pilot iteration for DBA consists of:

1. extending use of the intermediation pattern to allow for more fine grained powers validation (intermediation pattern remains unchanged, SEMPER extension will be added)
2. the Subscription and notification pattern
3. the Lookup pattern (the lookup of evidence, not individual attributes).

The solution architecture of (1) has been specified in chapter Solution architecture for DBA authentication and powers validation and the solution architectures for (2) and (3) have been included in chapter Solution architecture for Subscription & Notification pattern and Lookup pattern.

Solution architecture for DBA authentication and powers validation

This section contains the eIDAS solution architecture for the DBA pilot. eIDAS will be used for piloting the intermediation pattern in DBA pilot iteration 1 and 2.

In all DBA cases a natural person will represent a company in the cross-border eProcedure. In both iterations the powers of the representative will be validated. The granularity is different in both iterations though. In the first iteration only full powers will be validated. The pilot partners will use currently available eIDAS functionality for communicating this cross-borders. The second pilot iteration adds fine-grained powers validation to eIDAS. It allows for explicit expression of powers in a powers validation request and powers declaration. This requires extension of eIDAS with the SEMPER concepts and software.

General design decisions

The DBA eIDAS architecture has been designed according to the following general design decisions (see DBA deliverable D4.6):

1. The DBA pilot will implement a pilot-eIDAS-network, meaning the Member States will implement dedicated pilot eIDAS nodes for cross-border authentication and powers validation that is isolated from the regular network of eIDAS nodes. As the project extends on the use of eIDAS with legal person attributes and powers validation, regular eIDAS nodes are not suitable for piloting. Furthermore, use of the dedicated eIDAS network allows for acceptance of non-notified eID for piloting only.
2. The DBA pilot uses the eIDAS company identification attributes ('legal person attributes in eIDAS') to communicate the represented legal person to the DP. As most Member States do not provide these attributes currently, they need to be added for piloting.
3. The DBA pilot will use eIDAS attribute profile 1.1 and/or CEF’s reference software for the eIDAS node version 2.4.
4. The DBA pilot will use the SEMPER extension that is compatible with the eIDAS node 2.4 for fine-grained powers validation in the second pilot iteration.

Compared to current eIDAS practice, the use of eIDAS will be extended by the DBA pilot with:

1. Requesting and sending legal person attributes (identifying the company that applies for the service). Although eIDAS has been able to send legal person attributes from the start, this functionality has been notified just twice (by IT and NL) and has not been used in production services.
2. Validating powers of representation. This function is not part of the eIDAS-network currently.

Ad 1. Legal Person attributes & record matching at the DC

• The pilot partners will send the mandatory eIDAS attributes for the legal person after successful authenticating and validating powers (LegalPersonIdentifier and LegalName).
• The Data evaluator in the DBA pilot needs record matching on the company to determine whether the company has been registered at the company portal prior to the pilot start (without LegalpersonIdentifier). The data evaluator will use the second mandatory eIDAS attribute (LegalName) for that purpose. If needed the Data evaluator interacts with the user to do additional checks in the matching process. Record matching at the data evaluator is an eProcedure portal (or data consumer) specific activity that does not need harmonisation across piloting partners.
• The data owner does not need to do record matching on the company as it can use the LegalPersonIdentifier to uniquely identify the company involved. This is a consequence of the pilot principle, that the authenticating proxy sends a LegalPersonIdentifier containing a company identifier that the business register itself uses in its company registration.
• Data evaluators and data owners do not need to do record matching on the natural person. Therefore, no additional eIDAS attributes of the natural person are needed.

For more information, please see DE4A D4.6 DBA Pilot Planning v1.0 final.pdf

Ad 2. Powers validation

• Pilot iteration 1 supports implicit full powers only. It uses the eIDAS network currently operational for sending the required information. The eIDAS infrastructure – from the start – supported exchange of natural person attributes as well as company identification attributes (‘legal person attributes’). The eIDAS regulation defined the minimum datasets for both the natural and the legal person. The eIDAS network lacks a possibility to specify the powers of representation though; attributes specifying the powers (‘the powers declaration’) have not been defined yet. Hence, in iteration 1 the pilot partners agreed on the following access policy rule: “In case of full powers, the eIDAS authentication will be successful and the authentication proxy sends the eIDAS legal person attributes as well. In case of insufficient powers, the authentication must fail at the eIDAS proxy.”. Only that way the data consumer knows whether the user has full powers or not.
• Pilot iteration 2 supports fine grained powers validation. By using the SEMPER extension on eIDAS, not only the natural and company identification attributes can be exchanged, an explicit powers declaration will be included as well. Using the extension, the data evaluator specifies the scope of the service the user needs powers for. After validating the powers, the authentication proxy constructs a powers declaration confirming or denying the person’s powers. This way, the extension allows for fine-grained powers validation.

Main design decisions regarding fine grained powers validation in iteration 2:

1. the DBA pilot allows for representation of legal persons by natural persons only.
2. the DBA pilot does not allow for intermediary parties (e.g. employee of an accounting firm operating on behalf of the company).
3. the DBA pilot will operate a list of harmonised services to express the extent of powers. Non-harmonised services will not be supported.
4. the DBA pilot will use the SDG annex II procedures as starting point for the list of harmonised services.
5. the DBA pilot will implement fine grained powers using the SEMPER extension to eIDAS or implement the SEMPER concepts in custom eIDAS software.

For more information, please refer to DE4A D4.6 DBA Pilot Planning v1.0 final.pdf

Process realisation

The table below presents the components that implement the application services for the DBA pilot.

table: process realisation

Process	Application service	Components
Request authentication, including powers validation	Authentication initiation	eProcedure portal
		Specific eIDAS connector
		eIDAS connector
		SEMPER extension
Authenticate user	User authentication	Identity Provider
Validate powers of representation	User authentication	Mandate Management System
Retrieve legal person attributes	User authentication	Legal Person attribute provider (may be same as Mandate Management System)
Provide authentication details, including powers declaration	User authentication	Specific eIDAS proxy
		eIDAS proxy
		SEMPER extension

Component description

The table below describes each of the components in this solution architecture.

table: component description

Component	Type	Short description of its use	Changes for 2nd iteration piloting
eProcedure portal	DC specific	The eProcedure portal handles all user interaction on the web. It connects to the national eIDAS node via the specific eIDAS connector. This requires the eProcedure portal to add the eIDAS login option to the login-webpage and interface to the specific eIDAS connector. As the DBA Pilot will use a dedicated network of eIDAS nodes, the eIDAS login option should be separated from the regular eIDAS login option (in case not already available on the eProcedure portal). The DBA login option should invoke the dedicated eIDAS connector instead of the regular one (a different URL).	In iteration 1 the eProcedure portal should request: authentication at LoA substantial the natural person attributes (at least the mandatory ones) - to be discussed. This does not work with node 2.5/profile 1.2 implemented by AT (and SE?). the legal person attributes (at least the mandatory ones) In iteration 1 the eProcedure portal should apply the following rules for granting access after authentication: deny the user access in case of an “authentication failed”-reply. grant the user access in case of an “authentication successful”-reply. In iteration 2 the eProcedure portal should request: authentication at LoA substantial the legal person attributes only (at least the mandatory ones) request a powers validation on the applicable harmonised service In iteration 2 the eProcedure portal should apply the following rules for granting access after authentication: deny the user access in case of an “authentication failed” or "powers not sufficient" grant the user access in case of an “authentication successful” and "powers sufficient" Please note: we need to discuss the requesting of eIDAS MDS attributes taking eIDAS profile 1.2 (section 2.8) into account (request from AT).
Specific eIDAS connector	Member State Specific	The Member State specific component that translates national eID protocol into eIDAS (light) protocol for requesting authentication and powers validation. Member States usually implement one or more components to ‘bridge’ eIDAS to the national eID infrastructure. As from CEF eIDAS reference software 2.0, Member States use the eIDAS Light protocol for this.	To enable fine grained powers validation in iteration 2, the specific eIDAS connector needs to be extended for requesting powers validation alongside authentication.
(pilot) eIDAS connector	Common component (MS deployment)	The component Member States implement to connect to the eIDAS network as a relying party. The connector accepts authentication requests from the data evaluators of the Member State and forwards the requests to the Member States that needs to authenticate the user. After authentication, the eIDAS connector receives the authentication results and sends them to the requesting data evaluator. The eIDAS connector can be implemented using CEF’s reference software or a custom implementation compliant to the eIDAS interoperability specifications. The CEF reference software implements – besides the eIDAS SAML profile – also the JSON/REST eIDAS Light protocol to connect to national infrastructure.	No changes in 2nd pilot iteration.
SEMPER extension	Common component (MS deployment)	Component for extending the eIDAS connector and the eIDAS proxy to allow for explicit powers validation requests and powers declarations.	Needs to be deployed by Member States for communicating fine grained powers in iteration 2. This component has been developed by the SEMPER project and needs to be deployed on the eIDAS node of each of the Member States. As an alternative Member States May develop a custom implementation of the SEMPER software that complies with the SEMPER SAML interface specifications.
(pilot) eIDAS proxy	Common component (MS deployment)	The component Member States implement to allow authentication with their (notified) eID for services provided in other Member States. The eIDAS proxy receives authentication requests from relying Member States, coordinates authentication, retrieval of legal person attributes and powers validation. The eIDAS proxy then sends the result to the requesting eIDAS connector. Just like the eIDAS connector, the eIDAS proxy can be implemented using CEF’s reference software or a custom implementation compliant to the eIDAS interoperability specifications. The CEF reference software implements – besides the eIDAS SAML profile – also the JSON/REST eIDAS Light protocol to connect to national infrastructure.	No changes in 2nd pilot iteration.
Specific eIDAS proxy	Member State Specific	The Member State specific component that translates national eID protocol into eIDAS (light) protocol for performing authentication and powers validation. Member States usually implement one or more components to ‘bridge’ eIDAS to the national eID infrastructure. As from CEF eIDAS reference software 2.0, Member States use the eIDAS Light protocol for this. Furthermore, the eIDAS proxy coordinates the login process at the DP Member State by triggering the IdP, Legal Person AP and MMS.	In the second pilot iteration the Specific eIDAS proxy needs to be adapted to translate the powers validation request (the scope of powers to be precise) to national powers taxonomy, send a powers validation request to the Mandate Management System in national protocol, receive and interpret the response from the Mandate Management System and translate it back to cross-border taxonomy.
Identity Provider	Member State Specific	The Identity Provider handles authentication of the natural person. The IdP may be notified under eIDAS, but does not need to be notified to be used in the DBA pilot.	No changes in 2nd pilot iteration.
Legal Person AP	Member State Specific	Member States need to provide the identifying (mandatory) attributes of the legal person (eIDASLegalPersonID and eIDASLegalName) to the specific eIDAS proxy. Member States could provide optional attributes of the legal person. The Legal Person attributes may be integrated in the national eID scheme. For example, in eRecognition (NL) the mandate management system also provides the legal person attributes. Mandate Management System and Legal Person AP are one and the same component then.	No changes in 2nd pilot iteration.
Mandate Management System	Member State Specific	Member State specific solutions for registration and validation of powers.	In the DBA first pilot iteration, this source must be used to verify full powers. The declaration of powers that results from validating full powers is implicit: in case the authentication is successful, the user will have full powers to represent the company. In the second pilot iteration, when using SEMPER, the powers declaration is explicit: the powers declaration relates to the requested powers declaration and can be a powers declaration for a specific eService as well as a (explicit) powers declaration for full powers. Optionally (depending on national implementation) the harmonised services need to be included in the MMS.

Functional requirements

The table below presents the requirements that the data evaluator and the authentication connector and proxy must implement.

Role	Component	Requirement	Use in pilot iteration 1	Use in pilot iteration 2
Data evaluator	eProcedure portal	The eProcedure portal adds an eIDAS login option for piloting.	x	x
		The eProcedure portal connects to a dedicated eIDAS pilot node.	x	x
		The eProcedure portal requests eIDAS legal person attributes (mandatory ones)	x	x
		The eProcedure portal grants the user access on behalf of the company in case of an “authentication successful” response.	x
		The eProcedure portal additionally constructs a fine-grained powers validation request.		x
		The eProcedure portal validates the Powers declaration received.		x
Authentication connector	SEMPER extension	MS implements SEMPER extension to the eIDAS connector.		x
	Specific eIDAS connector	MS adapts the "specific eIDAS connector" to support powers validation requests and powers declarations		x
	eIDAS connector	MS implements eIDAS connector 2.4. In case of a custom implementation (like Sweden) an attribute profile 1.1-compliant version of the connector will be used for piloting.	x	x
Authentication proxy	SEMPER extension	MS implements SEMPER extension to the eIDAS proxy.		x
	Specific eIDAS proxy	MS adapts the "specific eIDAS proxy" to support powers validation requests and powers declarations		x
	eIDAS proxy	MS implements CEF eIDAS proxy 2.4. In case of a custom implementation (like Sweden) an attribute profile 1.1-compliant version of the connector will be used for piloting.	x	x
		MS connects an IdP to the eIDAS proxy node for authenticating the natural person	x	x
		MS connects attribute provider (AP) to eIDAS node for eIDAS legal person attributes (in case not integrated in the MMS)	x	x
		MS connects mandate management system (MMS) to eIDAS node for validating powers. Note: AP and MMS could be the same data source.	x	x
		MS validates (implicit) full powers	x
		MS adds fine-grained powers validation		x

Component Deployment

The table below shows the required deployment of common components.

Component	Version
eIDAS connector	CEF reference software version 2.4 or custom software implementing interoperability specs 1.1
eIDAS proxy	CEF reference software version 2.4 or custom software implementing interoperability specs 1.1
SEMPER extension	The 2.4-compliant version of the SEMPER extension provided by Technical University Graz (SEMPER project)

Open questions AT:

• can we upgrade to eIDAS node 2.5? No compatible SEMPER extension available (check with TUG).
• can we adapt the way we request attributes for iteration 1? -> don't request the natural person attributes, use the natural person representative attributes for this (profile 1.2 style).

Configuration of authentication requests

Configuration for pilot iteration 1

• regular eIDAS request & response
  • eIDAS attributes to request: natural person and legal person attributes (at least the mandatory ones)
  • eIDAS attributes to respond with: natural person and legal person attributes (at least the mandatory ones) - including a copy of natural person attributes as representative is optional.

Configuration for pilot iteration 2

• regular eIDAS request & response
  • eIDAS attributes to request: legal person attributes only (at least the mandatory ones)
  • eIDAS attributes to respond with:legal person attributes (at least the mandatory ones) and representative natural person attributes (at least he mandatory ones) using the representative-prefix

• powers validation request & powers declaration (response)
  • request:
    • scope of powers to validate
    • type of representation allowed
    • source of powers accepted
  • response:
    • validation result (successful or not)
    • type of representation
    • source of powers

Configuration of harmonised services

Principles for configuration:

• The DBA pilot will rely on a common library of services to express the extent of powers: the harmonised services. This way, each of the participating Member States understand the powers validation requests of other Member States. It's up to each of the Member States to translate the harmonised services into nationally defined services (authentication connector-side) / powers (authentication proxy-side).
• The DBA pilot will use the SDGR services as starting point. These services have been defined in European legislation (as procedures in annex II of the Regulation). Hence, they have been pre-defined and harmonised already across Europe. The DBA pilot defines the "SDGR" harmonised services catalogue for use in the SEMPER extension.
• The DBA pilot is not limited to SDGR services though, e.g. opening a branch cross-border is explicitly excluded from the SDGR, but is included in some of the pilot scenario's. For services 'beyond SDGR' the DBA pilot has defined the "SDGR+" harmonised services catalogue.

Proposal for the harmonised services to express powers cross-border:

table: harmonised services for cross-border validation of powers

Service catalogue	Nr	Harmonised service
SDGR	1	Notification of business activity, permission for exercising a business activity, changes of business activity and the termination of a business activity not involving insolvency or liquidation procedures
SDGR	2	Registration of an employer (a natural person) with compulsory pension and insurance schemes
SDGR	3	Registration of employees with compulsory pension and insurance schemes
SDGR	4	Submitting a corporate tax declaration
SDGR	5	Notification to the social security schemes of the end of contract with an employee, excluding procedures for the collective termination of employee contracts
SDGR	6	Payment of social contributions for employees
SDGR+	1	Starting of a company or opening a branch in another member state
SDGR+	2	Initial registration of a business activity with the business register

Logical interfaces

SAML interface specifications for regular authentication requests (pilot iteration 1) have been specified by CEF Digital: https://ec.europa.eu/cefdigital/wiki/display/CEFDIGITAL/eIDAS+eID+Profile

SAML interfaces specification for SEMPER-extended authentication request and response (pilot iteration 2) have been specified by SEMPER: see chapter 6 from deliverable M3 Report on mandate attributes and solutions for cross-border mandate attributes - 1.0.

File:2019-07-08 M3 Report on mandate attributes and solutions for cross-border mandate attributes - 1.0.pdf

Solution architecture for Subscription & Notification pattern

This section specifies the solution for the additional Subscription & Notification pattern that will be piloted by the DBA pilot in the second iteration.

• Within scope
  • Modify DO/DE Mocks for the S&N pattern: for testing the new patterns, new versions of the DO- and DE-mocks need to be developed by WP5.
  • Common component for Cross-border subscriptions and notification (optional for MS to use, i.e. not mandatory).
  • Event Notification, in line with PSA 2nd iteration: the PSA defines several options for implementing the S&N pattern. The option chosen provides a solution for notifying business events and triggering of the Lookup pattern in case (an updated version of) evidence is required by the DE.
• Outside scope
  • Resend a subscription request in case of an error; the possibility to inspect the logs and manually resend a request is deemed sufficient for piloting.
  • Include the Evidence in the notification: in case the DE needs (an updated version of) the evidence, it will use the Lookup pattern.

Prerequisite from the DE4A-project is the use of eDelivery and AS4 for the exchange of messages in the S&N and Lookup patterns. This means that eDelivery will be used for:

1. requesting a subscription (DE to DO)
2. confirming a subscription (DO to DE)
3. notifying a business event (DO to DE)
4. requesting evidence (DE to DO) (see Lookup section)
5. sending the evidence (DO to DE) (see Lookup section)

In the next sections the general design decisions, process realisations, component descriptions, requirements, component implementations and expected logical interfaces are described.

General Design Decisions

• The OOP TS domain (WP5) provides the data requestor and data transferor with the components needed for:

1. exchange of cross-border subscription and notification messages
2. performing the lookup of an evidence (see Lookup section)

• The DBA pilot uses one type of subscription message and one type of notification message that all DC’s and DP’s involved will use. The subscription message is for subscribing to cross-border events generated at the DP. The notification message is for notifying the DC of such events. If the DC desires the Evidence can be retrieved using the Lookup. This implies an update of the IEM (WP3).
• There will be just one data provider per Member state: the business register, where the subscription will be recorded and where the cross-border events are generated, i.e. the authentic source of company information. The pilot does not support multiple DO's / notifying authorities in one Member State.
• The DC will subscribe in one Member State at a time.
• The DP will notify one Member State at the time. In case DE's from different Member States have subscribed to business events of a single company, the DP needs to notify each of the Member States individually.
• The explicit request and the preview functions won't be implemented, in S&N there is no user involvement. Please note that business event notification is considered an extension to the SDGR.

Process realisation

The solution for the OOP TS chain consists of required functionality of the OOP Technical System expressed as application components and interfaces in the diagram below. Some OOP TS components need to be implemented by the data requestor and data transferor, some components by the data evaluator and data owner and some are common components to be implemented by DE4A WP5. The image below depicts the solution for the Subscription & Notification pattern (S&N) with the familiar split in the different roles.

OOP TS DBA Subscription & Notification

The table below presents the components that implement the application services for the DBA pilot. The process realisation is split in two (subscription and notification) as they are independently triggered. See Subscription and Notification for more details.

Subscription

Process	Application Service	Components
Initiate subscription (DC)	Subscription Initiation	eProcedure Back-office Backend
Change subscription (DC)	Subscription Initiation	eProcedure Back-office Backend
Lookup event provider routing information (DC)	Inquire Routing Information	Data Service Lookup
Send subscription request (DC)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Validate subscription request (DP)	eSignature Validation Service Message Decryption Authority Check	Authorization Controller Trust Service Provisioning Data Encryption/Decryption
Evaluate subscription request (DP)	Subscription Evaluation	Subscription System
Exception: Prepare subscription error message (DP)	Subscription Error Handling	Subscription System
Exception Send subscription error message (DP)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Exception: Forward subscription error (DC)	n/a
Exception: Investigate reason for subscription error (DC)	n/a
Register subscription (DP)	Subscription Creation and Update	Subscription System
Confirm subscription (DP)	Subscription Confirmation	Subscription System
Send subscription confirmation (DP)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Forward confirmation (DC)	n/a
Log subscription information (DC)	n/a

Notification

Process	Application Service	Components
Identify event (DP)	Cross-border Event Filter	Cross-border Event Handler
Check subscriptions (DP)	Subscription Lookup	Subscription System
Prepare notification message and subscriber list (DP)	Notification Message and Subscriber List Preparation	Cross-border Event Handler
Exception: Resend past events (DP)	Manual Event Dispatch	Notification Front-end
Resolve service metadata (DP)	Inquire Routing Information	Data Service Lookup
Exception: Resolve subscriber participant ID and inform National Contact Point (DP)	Subscription Mismatch Log	Notification Front-end
Send event notification (DP)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Validate event notification (DC)	eSignature Validation Service Message Decryption Authority Check	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Determine event response (DC)	Event Evaluation	eProcedure Back-office Backend
Request change of subscription (DC)	Notification Mismatch Signal Update Notification Response Log	eProcedure Back-office Backend
Dismiss event (DC)	Update Notification Response Log	eProcedure Back-office Backend
Trigger evidence lookup (DC)	Update Notification Response Log	eProcedure Back-office Backend
Notify Responsible Organization (DC)	Update Notification Response Log	eProcedure Back-office Backend

Component description

The following table lists the components indicated in the image above. Per component a short description of its use is given, by which role the component is used (i.e. DE, DR, DT, DO) and whether the component is MS specific or common functionality.

Component	Short description of its use	Role	Genericness	Changes for 2nd iteration piloting
eProcedure Back-office Backend	This component implements back-end functionality for executing the eProcedure. Examples in the context of S&N: collecting relevant data for a subscription request keeping track of subscriptions of the DE processing subscription confirmations / errors determining an appropriate response to a notification (e.g. discard or Lookup updated evidence) updating logs	DE	TBD	TBD is the required functionality is generic enough to justify a common component? Each DE needs to keep track of its subscriptions and needs some event handling as well. Subscription System: Registering the subscription at DP and logging subscription at DC is similar in functionality but mirrored. This could be common component (reference implementation) or at least a specification. This component would be optional for MS to use. TODO data model, operations, logical I/Fs.
Back-office to OOP TS	Interface for connecting the DE's backoffice with the OOP TS for: requesting subscriptions receiving confirmations / errors receiving notifications requesting evidence by Lookup Just like the portal to OOP TS interface, Member States may choose to implement this interface in a generic way to bridge national OOP protocols to DE4A datamodel at one single place. Furthermore, Member States may choose to integrate both interfaces (portal to OOP TS and backoffice to OOP TS) in one single interface.	DE, DR	specific	Needs to be developed and implemented for the second iteration. May be partial re-use of the portal-to-OOP interface.
DE4A Connector	Taking care of eDelivery and IDK interfacing, shielding DR and DT from complexities and facilitating ease of implementation. Error handling and logging.	DR, DT	common (MS deployment)	Needs extension for S&N and Lookup patterns to facilitate interaction on: - subscriptions - notifications - evidences (Lookup style).
Evidence service locator (ESL) configuration file Issuing Authority Locator (IAL) TBC	Configuration file for locating the service to reach out to.	DR, DT	common (MS deployment)	Change w.r.t. iteration 1? There is no evidence provider lookup, instead the endpoint where to send the subscription request to is needed. Also there is no evidence response, it is event oriented now. As the DBA pilot’s MVP uses just one type subscription message with just one data provider per Member state (on NUTS0 level), there is no need for dynamic discovery of the data provider. For the DBA pilot it is sufficient to use a simple configuration file with the required elements (member state and participant id) like in iteration 1. See logical interfaces section below
SMP	For each subscription request/response, information on the receivers Access Point (URL) and its certificates are needed. Each member state hosts an SMP for this purpose (note: for testing one single centrally hosted DE4A SMP will be used). Before sending a request or response, the sending party queries the SMP of the receiver to get this info.	DR, DT	common (MS deployment)	None expected.
eDelivery AS4 gateway	This component – also referred to as eDelivery access point – handles the secure transfer of the data, including encryption and decryption as well as signing/sealing and validating signatures/seals.	DR, DT	common (MS deployment)	Needs configuration for accepting subscription, notifications and lookup messages for the second iteration.
DNS & SML	As there are multiple SMP’s, the sending party needs to know where to find the SMP of the receiver to get the actual metadata. This location can be found in the centrally CEF-hosted DNS, that will be queried by the access point of the sending member state. DNS entries will be created from the registration of SMP’s: the SML, which is also centrally hosted by CEF.	Central	common (centrally hosted by CEF)	None expected.
Cross-border Event Handler	Application component handling the cross-border events. It filters all domestic events for relevant cross-border events and takes care of preparing a notification message and compiling a subscribers list to which the notification must be sent.	DO	common (MS deployment)	The Cross-border Event Handler could be part of the Connector or at least be a common component. All DPs need this functionality. Needs to be developed and implemented by the DO.
Event handler to OOP TS Interface	Interface for connecting the OOP TS with the Cross-border Event Handler.	DO, DT	specific	Needs to be developed and implemented by the DT.
Authorization Controller	In case of S&N Establishes whether the DE is allowed to subscribe. Established whether the DP is allowed to send a notification. This prevents unauthorised sending of (fake) notifications. TBD: do we need a common functionality for this or can we leave it up to the DE to check whether the notification comes from the authority to which it subscribed?	DR, DT	common	To be developed.
Subscription System	Application component managing the entire life cycle of subscriptions, i.e. creation and maintaining subscriptions. It also offers functionality for validating subscriptions (does subject exist?, is the event supported?, is the subscription changing an existing subscription?), confirmation of a subscription and error handling.	DO	common (MS deployment)	To be developed
Notification front-end	Application component providing the UI for civil servants to dispatch events and consult logging information for trouble shooting.	DO	common (MS deployment)?	Out of scope for piloting DBA.

Functional requirements

The table below presents the requirements that the components involved need to implement.

TO DO: check alignment of table and PSA 2nd iteration.

Component	Nr	DBA requirement	Comment
eProcedure Backoffice Backend	1	The DE should be able to subscribe to the combination of: a company one or more business events (catalogue & type)	For piloting it is sufficient to skip the specification of events to subscribe to. It will be all or none.
	2	The DE should monitor actual subscription at the DO by processing the subscription confirmation / error.
	3	The DE should have the option to set a defined time frame for receiving notifications to automatically end a subscription.
	4	The DE should be able to manage the “end date” of the subscription (prolong, shorten, …).
	5	The DE should be able to unsubscribe to all notifications for a company at once.	See req 1. for piloting a "all or none" subscription is fine.
	6	The DE should at any time have an overview of all its subscriptions in order to manage them.
	7	The DE may process a notification instantly, but may also choose to process the notifications in batch, e.g. once a day or week.
	8	The DE should have a legal basis for processing business events.	It’s up to the DE to manage this. The DE will be accountable for its data processing.
	9	The DE should implement logic to decide when (by which events) to lookup evidence.
DE4A connector	1	The DR must confirm having received the notification (by the DR not the DE) to the DT.	From that point on delivery of the notifications to the DE is the responsibility of the DR (and not the DT or DO).
	2	The DT needs to confirm having received the subscription request to the DR.
	3	Each message sent requires a confirmation from the receiving actor (acknowledgement). For technical error messages concerning a subscription, notification or lookup the existing WP5 list can be used. e.g. timed-out, component unavailable, XML error, etc.	Errors need to be implemented for the messages required for both new patterns.
Back-office to OOP TS interface	1	The DR should provide a facility for delayed forwarding of notifications to the DE.	The probably needs a queue for this. This queue should guarantee delivery of the notifications to the DE, even if the DE is not online at some point in time.
Subscription system	1	The DO should send a confirmation of registering or changing the subscription to the DE.	Including error code and handling.
	2	The DO should generate one of the following error messages in case of registration error: 1. subscription registration failed (e.g. actor not authorised to subscribe, company identifier not found) 2. subscription change failed (e.g. subscription to change not found in subscription system).	For piloting these two business errors are sufficient. Business list of errors might be extended in future releases (after piloting). As a generic principle, the error message should convey little information in itself. Providing more information enables possible attackers in their attempts.
	3	The subscription system should register: - data evaluator - company ID - business event - starting date & time - ending date & time	Please note that, in piloting DBA, pilot partners will implement an 'all or nothing'-subscription. This way, a subscription for a specific company is for all business events at once or for none (no subscription then). Hence, the element "business event" will not be used to differentiate between business events that are and that aren't included in a subscription. The element "business event" may be included in the components data store for future use though (to be decided by WP5). Furthermore, the element may be generalised to "event" to cover future use of other types of events.
	4	The subscription system should allow for querying which data evaluators to notify in case of a business event.
Cross-border Event Handler	1	The cross-border event handler should: translate national events to harmonised events (as defined by the event catalogue) filter national events for relevance (i.e. presence in event catalogue) query the subscription system for subscribers to a particular event construct notification message for each of the subscribers
	2	The DO should send notifications only for a business event occurring to a company for which the DE has subscribed – for as long as the subscription is valid.	For piloting is seems sufficient to notify one single Member State in case of an event at a time.
	3	The DO should include the company identifier in the notification to allow the DE to find the corresponding record in its registry.
	4	The DO should include additional company identifiers that the business event concern.	E.g. The identifiers of the company / companies acquiring the company concerned.
	5	The DO should clearly state in the notification what business event has occurred.
	6	The DO should provide a timestamp of the business event separate from the timestamp of the notification.
	7	The DO may send notifications instantly, but may also send in batch, e.g. once a day or week.
	8	The DO should be able to send notifications independently of the availability of the DE.	In order not to hinder the notification process of the DO.
	9	The DO should not include any additional company data in the notification nor attach evidence of any type to the notification.	Data minimisation. It will be up to the DE to process the notification. This might not need any additional data.
	10	The DO should implement one event for notifying "the company registration evidence has changed" (without specifying which business event has occurred - if any).	To cover for data changes that might be relevant for the DE without being a direct consequence of the occurrence of a harmonised business event, e.g. e-mail address changed.
Authorisation controler	1	The authorisation controler blocks any message not sent by one of the piloting partners.	This simple functionality is sufficient for piloting S&N and Lookup.
Data service	1	The data service of the DO needs to be capable of detecting business events and triggering a notification.
	2	The data service of the DO needs to support the event type "Company registration evidence has changed"

Component deployment

• DNS, SML will be reused from iteration 1.
• SMP, eDelivery AS4 gateway will be reused from iteration 1.
• The Evidence service locator (ESL) configuration file probably needs to change to allow for locating the subscription register.
• The DE4A Connector needs an update.
• Various MS specific interfaces may be needed for (sub)system integration.
• Both DE and DO need to do bookkeeping of subscriptions.
• Both DE and DO need event handling functionality.

Configuration of business events

Business events are defined by each of the Member States individually. Although there are commonalities, all event-lists of the Member States are different. To enable cross-border interpretation of business events harmonisation of events is needed. For piloting DBA, just a small selection of events will be piloted. The purpose of the DBA pilot is not to harmonise all events, but to validate the notification-mechanism.

The DBA event list (catalogue "Business events") builds upon the BRIS definitions.

List of harmonised events in the Event catalogue "Business events":

1. Company ended its operations
2. Company changed its legal form
3. Company merger or takeover
4. Company moved to another location
5. Company administration changed
6. Company registration evidence has changed

TO DO: validate within DBA pilot.

National-to-harmonised translation needs to be designed by each Member State. Example for NL below (concept).

nr	harmonised event	NL event equivalent
1	Company ended its operations	beëindigen rechtspersoon opheffen onderneming
2	Company changed its legal form	omzetten rechtspersoon
3	Company merger or takeover	fuseren rechtspersoon
4	Company moved to another location	verhuizen vestiging
5	Company administration changed	toetreden bestuurder toetreden functionaris toetreden gemachtigde toetreden aansprakelijke bij samenwerkingsverband uittreden functionaris/bestuurder/gemachtigde/aansprakelijke bij samenwerkingsverband
6	Company registration evidence has changed	(not an event)

Logical interfaces

The expected logical interfaces are expected to remain largely the same with an expansion for the new patterns.

We need to discuss with WP3/WP5 the implementation of the Data Service Lookup ABB. Right now this is covered by two SBBs ESL and IAL.However, for S&N there is no evidencen lookup or exchange, so at least the name is off. Also the I/F with the Connector changes slightly. In the table below some differences are indicated.

Component	Expected interface
Evidence service locator (ESL) configuration file Issuing Authority Locator (IAL) TBC	IN (from DE4A connector to ESL configuration file): -         Member state -         event type (e.g.DBA = business event) OUT from ESL configuration file to DE4A connector): -         participant ID
SMP	IN (from DE4A connector to SMP): -         Participant ID OUT (from SMP to DE4A connector): -         Service URL -         Certificate to use
DNS & SML	IN (from DE4A connector to DNS): -         Member state -         Participant ID OUT (from DNS to DE4A connector): -         SMP location
eDelivery AS4 gateway	IN (from DE4A connector to eDelivery AS4 gateway): -         subscription request/registration conformation/notification OUT (from eDelivery AS4 gateway to DE4A connector): -         ACK
DE4A Connector	Subscription Initiating or changing subscription IN (from DE to DE4A connector): request ID (correlation) subject identifier (company in question) data owner identifier (DO id = participant ID) subscriber identifier (DE id = participant ID) event catalogue (DBA fixed business events) action 'subscribe'/'change subscription' (new) subscription start and end date OUT (from DE4A connector to DE): ACK (from DT) Subscription confirmation IN (from DO to DE): request ID data owner identifier (DO id = participant ID) subscriber identifier (DE id = participant ID) status (success/fail) OUT (from DE to DO): ACK Notification IN (from DO to DE4A connector): subscriber identifier (DE ID = participant ID) data owner identifier (DO id = participant ID) notification subject identifier (company in question) catalogue event event timestamp event OUT (from DE4A connector to DR): ACK (from DR)
Authorization Controller	S&N IN -         data evaluator identifier (DE id = participant ID) - event catalogue OUT -         yes/no
Cross-border Event Handler	IN -         domestic event OUT -         cross-border event or n/a Ivar: see this components description and requirements. I expect a array of notifications as output. The event handler should not only translate and filter events against the harmonised catalogue, but also query the subscription system for subscribers and construct notification messages
...

Solution architecture for Lookup pattern

This section specifies the solution for the Lookup pattern that will be piloted by the DBA pilot in the second iteration. basically, the Lookup pattern will be implemented as the intermediation pattern, but without: user authentication, explicit request and preview.

The Lookup pattern will be used to quickly retrieve (updated) evidence needed to keep a local company data store up-to-date, to re-asses a service provided or for generic fraud prevention purposes.

Within scope of the DBA pilot:

• Modify DO/DE Mocks for the Lookup pattern: for testing the new pattern, new versions of the DO- and DE-mocks need to be developed by WP5.
• Evidence Lookup, the PSA defines several options for implementing the Lookup pattern. The option chosen is based on requesting (an updated version of) evidence.

Outside scope of the DBA pilot:

• Attribute Lookup: this solution architecture supports Evidence type lookup requesting the full evidence without user interaction. The option to request individual attributes / API-approach is not supported.

Prerequisite from the DE4A-project is the use of eDelivery and AS4 for the exchange of messages in the Lookup patterns. This means that eDelivery in the Lookup pattern will be used for:

1. requesting evidence (DE to DO)
2. sending the evidence (DO to DE)

In the next sections the general design decisions, process realisations, component descriptions, requirements, component implementations and expected logical interfaces are described.

General Design Decisions

• The OOP TS domain (WP5) provides the data requestor and data transferor with the components needed for performing the lookup of an evidence.

• Based on a received notification message the DC, if desired, retrieves the Evidence using the Lookup.
• The explicit request and the preview functions won't be implemented, in the Lookup pattern there is no user involvement.

Process realisation

The solution for the OOP TS chain consists of required functionality of the OOP Technical System expressed as application components and interfaces in the diagram below. Some OOP TS components need to be implemented by the data requestor and data transferor, some components by the data evaluator and data owner and some are common components to be implemented by DE4A WP5. The image below depicts the solution for the Lookup Pattern (LKP) with the familiar split in the different roles.

Ivar: eProcedure portal heeft geen rol in Lookup. Toch? Ik verwacht de eProcedure backoffice.

OOPT TS Lookup

The table below presents the components that implement the application services for the DBA pilot. See Lookup Pattern for more details.

Process	Application Service	Component
Determine required cross-border evidence (DC)	Cross-border Evidence Matching	Evidence Type Translator
Lookup routing information (DC)	Inquire Routing Information	Data Service Lookup
Request evidence (DC)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Evaluate evidence request (DP)	eSignature Validation Service Message Decryption Data Exchange Service Authority Check	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Establish subject identity (DP)	Identity/Record Matching	Record Matching
Communicate non-availability of OOP (DP)	Error Handler Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Extract evidence (DP)	Evidence Lookup	Evidence Query
Communicate non-availability or Delay of evidence (DP)	Error Handler Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Establish non-availability of OOP (DC)	Evidence Request Tracker	Evidence Interchange Back-end
Compose evidence response (DP)	Domestic to Cannonical Evidence Transformation	Evidence Portal Back-end
Transfer evidence (DP)	Message Encryption e-Signature Creation Service Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Forward evidence (DC)	eSignature Validation Service Message Decryption Data Exchange Service	Trust Service Provisioning Data Encryption/Decryption Data Exchange
Evaluate evidence (DC)	Requirements/Evidence Matching	eProcedure Rules Engine

Component description

The following table lists the components indicated in the image above. Per component a short description of its use is given, by which role the component is used (i.e. DE, DR, DT, DO) and whether the component is MS specific or common functionality.

Component	Short description of its use	Role	Genericness	Changes for 2nd iteration piloting
eProcedure Back-office	Once the eProcedure backoffice logic has assessed the notification and has concluded one or more evidences (or updates to evidences) need to be requested, the back-office should send be able to send the evidence request to the OOP TS interface. Please note, in case of multiple data owners in one Member State, the Data evaluator needs to be aware which one to contact (as there is no possibility to ask the user). Hence, after processing the initial evidence in the intermediation pattern, it needs to store the data owner ('participant') to contact for updates. In the DBA pilot there will be only one data owner per Member State, so there is no need to store the participant at the DE.	DE	specific	The evidence request will be the same or similar to the request of the intermediation pattern.
Portal to OOP TS Interface	Member states may (but do not need to) implement an interface from national OOP protocols to the DE4A data model (DE4A connector). Such an interface guarantees that the data evaluator/owner can use the same (national) OOP protocols and services for cross-border use as well.	DE, DR	specific	None. This interface is used for the intermediation pattern (subscriptions and notifications will be triggered from the eProcedure backoffice)
DE4A Connector	Taking care of eDelivery and IDK interfacing, shielding DR and DT from complexities and facilitating ease of implementation. Error handling and logging.	DR, DT	common (MS deployment)	Needs extension for S&N and Lookup patterns to facilitate interaction on: - subscriptions - notifications - evidences (Lookup style).
Evidence service locator (ESL) configuration file Issuing Authority Locator (IAL) TBC	Configuration file for locating the service to reach out to.	DR, DT	common (MS deployment)	Change w.r.t. iteration 1? See logical interfaces section below
SMP	For each subscription request/response, information on the receivers Access Point (URL) and its certificates are needed. Each member state hosts an SMP for this purpose (note: for testing one single centrally hosted DE4A SMP will be used). Before sending a request or response, the sending party queries the SMP of the receiver to get this info.	DR, DT	common (MS deployment)	None expected.
eDelivery AS4 gateway	This component – also referred to as eDelivery access point – handles the secure transfer of the data, including encryption and decryption as well as signing/sealing and validating signatures/seals.	DR, DT	common (MS deployment)	Needs configuration for accepting subscription, notifications and lookup messages for the second iteration.
DNS & SML	As there are multiple SMP’s, the sending party needs to know where to find the SMP of the receiver to get the actual metadata. This location can be found in the centrally CEF-hosted DNS, that will be queried by the access point of the sending member state. DNS entries will be created from the registration of SMP’s: the SML, which is also centrally hosted by CEF.	Central	common (centrally hosted by CEF)	None expected.
Data Service	The webservice of the data provider that will output the evidence requested.	DO	specific	None expected.
Data source to OOP TS Interface	Interface for connecting the data service with the OOP TS (IM & LKP).	DO, DT	specific	None expected.
Authorization Controller	In case of LKP Establish which data service / evidence types can be requested by the DE/MS and whether this is allowed under applicable Union or national law without user request and preview. This functionality prevents unauthorised lookup of evidences.	DR, DT	common	To be developed.

Functional requirements

The table below presents the requirements that the components involved need to implement.

Component	Nr	DBA requirement	Comment
eProcedure Portal Back-end		The eProcedure portal backend needs to be able to
Portal to OOP TS Interface
DE4A connector	1
	2
	3
	4
ESL/IAL
SMP
eDelivery AS4 gateway
DNS & SML
Data service	1
	2
Data source to OOP TS Interface
Authorization Controller

Component deployment

• DNS, SML will be reused from iteration 1.
• SMP, eDelivery AS4 gateway will be reused from iteration 1.
• The Evidence service locator (ESL) configuration file probably needs to change to allow for locating the subscription register.
• The DE4A Connector needs an update.
• Various MS specific interfaces may be needed for (sub)system integration.

Logical interfaces

The expected logical interfaces are expected to remain largely the same with an expansion for the new patterns.

Component	Expected interface
Evidence service locator (ESL) configuration file Issuing Authority Locator (IAL) TBC	IN (from DE4A connector to ESL configuration file): -         Member state -         event type (e.g.DBA = business event) OUT from ESL configuration file to DE4A connector): -         participant ID
SMP	IN (from DE4A connector to SMP): -         Participant ID OUT (from SMP to DE4A connector): -         Service URL -         Certificate to use
DNS & SML	IN (from DE4A connector to DNS): -         Member state -         Participant ID OUT (from DNS to DE4A connector): -         SMP location
eDelivery AS4 gateway	IN (from DE4A connector to eDelivery AS4 gateway): -         subscription request/registration conformation/notification OUT (from eDelivery AS4 gateway to DE4A connector): -         ACK
DE4A Connector	Lookup As in iteration 1.
Authorization Controller	lookup IN -         DE id = participant ID - evidence type id OUT -         yes/no
...

Solution architecture for Intermediation Pattern

The solution architecture for the intermediation pattern has been designed in the first pilot iteration. Please refer to D4.6 Pilot planning for this architecture (not included in the wiki yet).

The solution architecture remains unchanged, except for two additional requirements for the eProcedure portal that have been introduced by the S&N pattern.

Component	Nr	DBA requirement	Comment
eProcedure portal	1	For the S&N pattern the logic of the eProcedure portal needs to be extended to initiate a subscription (start of S&N pattern). Whether a subscription is needed after processing the evidence is depending on the rules and regulation the data evaluator implements.
	2	For the S&N pattern the logic of the eProcedure portal might need to be adapted to include rules and texts for informing the user on subscriptions & possibly notifications. As S&N is out of scope of the SDGR, this informative step is not part of the explicit request process. However, the user should be informed of subscriptions.	Has no priority in piloting DBA S&N. Might be implemented by the DE, but it doesn't need to.

Appendix: archimate component diagrams

Solution architecture for Subscription & Notification pattern and Lookup pattern

TODO merge AC's and tailor to pilot increment 2.